Boxster S (987) F6-3.2L (2005)
/f6-3.2l/Page-557003.png)
13. Position rubber sleeves with screw-type hose clamps.
Installation Position For Intake-air Distributor Screw-type Hose Clamps
14. Tighten screw-type hose clamps -arrows- on resonance tube.
Intake-air Distributor
Work subsequent to installing intake-air distributor
Subsequent work for installing intake distributor
1. If the intake-air distributor for cylinders 1 - 3 was removed, the air-cleaner element must be installed.
2. Install throttle housing with distributor pipe.
3. Install engine compartment lid.
4. Read out fault memory and correct any faults that are present. Erase fault memory.
