Boxster S (987) F6-3.2L (2005)
/f6-3.2l/Page-563003.png)
Throttle Body
11. Position and tighten hexagon nut (M6) -arrow-.
Tightening torque 7.5 ftlb.
Fastening For Distributor Pipe
12. Position and tighten four screw-type hose clamps -1- on rubber sleeves.
Installation Position For Intake-Air Distributor Screw-type Hose Clamps
13. Attach hose for positive crankcase ventilation on oil separator and distributor pipe.
Distributor Pipe
Work subsequent to installing throttle body
1. Install engine compartment lid.
2. Read out fault memory and correct any faults that are present. Erase fault memory.
