Boxster S (987) F6-3.2L (2005)
Installing front belt lock
Installing front belt lock (driver's seat)
1. Install front belt lock.
DANGER: Loosen the safety-related threaded joint.
-
Danger of injury if belt lock is not screwed on correctly.
-
Always replace fastening screws for belt lock after customer service and reworking.
-
It is not permissible to make alterations to the microencapsulated screws (e.g. use lubricant, loosen bolts, and screw them down
again).
1.1. Fit front belt lock -4- ( -arrow- ) and secure with the fastening screw -3-.
Tightening torque: 50 Nm (37 ftlb.)
INFORMATION: The electric lead must not be routed too tightly around the seat cushion.
1.2. Route wire harness -1- and press it into the metal clips -2- ( -arrow A- ).
2. Assemble connector socket.
2.1. Push the single connectors -3- into the connector socket -1- ( -arrow- ) until they engage securely.
2.2. Fit a new tie-wrap -2- on the connector socket -1-.
3. Attach connector socket to the holder -arrow- until it engages securely.