Boxster S (987) F6-3.2L (2005)
Transmission Position Switch/Sensor: Service and Repair
WM 373119 Removing and installing multi-functional switch
Preliminary work
Preliminary work
1. Remove engine-compartment lid.
2. Fix the engine in the installation position using safety device 10-222 A at the engine lifting bracket.
Safety device
3. Raise the vehicle at the prescribed jacking points.
4. Remove support plate.
Removing multi-functional switch
Removing multi-functional switch
Danger: If the supports are folded down, the vehicle will roll off the platform lift when it is lowered.
--> Ensure that the platform is prevented from lowering.