Boxster S (987) F6-3.2L (2005)
Removing Microswitch
2. Pull bottom section of door opener -2- slightly backwards.
NOTE: Make sure that the locking tabs do not break when the microswitch is removed.
3. Gently loosen the locking tab -Arrow A-and remove the microswitch -3- -Arrow B-.
Installing microswitch for window opening controls
Installation Location For Window Opening Microswitch
1. Position microswitch -3- on the door opener -4- and press in until it can be felt to engage.
Installing Microswitch
2. Position the lower part of the door opener -2- under the handle and screw down with fastening nuts -1-.
Tightening torque: Final tightening 7 ftlb.
Clipping in the electric line for micro switches