Boxster S (987) F6-3.2L (2005)
3 - Intake distributor cylinders 4-6
4 - Air-conditioning compressor
5 - Supply tank
6 - Sealing rings
7 - Pulley
8 - Screw
9 - Hydraulic pump
Preliminary work
Preliminary work
1. Remove left front seat.
2. Remove rear wall cover.
3. Remove engine compartment cover.
Removing hydraulic mount
Removing
Overview of hydraulic pump
1 - Throttle housing with distributor pipe
2 - Resonance tube
3 - Intake distributor cylinders 4-6
4 - Air-conditioning compressor
5 - Supply tank
6 - Sealing rings
7 - Pulley
8 - Screw
9 - Hydraulic pump
1. Remove throttle housing and distributor pipe.
2. Remove resonance tube.
Loosen screw-type hose clamps, see -Arrows-, and remove resonance tube -2-.