Boxster S (987) F6-3.2L (2005)
/f6-3.2l/Page-628001.png)
Clutch Disc: Testing and Inspection
WM 305601 Checking clutch plate for wear
Preliminary work
Preliminary work
1. Remove clutch.
Checking clutch plate for wear
Checking clutch plate for wear
Information: It should be noted that the clutch lining does not wear linearly over the service life of the clutch. Due to the settling behavior of the
clutch lining, wear can be expected to be greater at the beginning. However, pad thickness wear will become less as mileage increases.
Information: Pad thickness measurement must only be done on the flanged side of the rivet head.
1. Place a commercially available depth gauge on the clutch lining -1- and measure the distance to the rivet head.
Measuring lining thickness
The wear dimension -X- measures 0.3 mm. If a smaller value is measured, the clutch drive plate must be replaced. When new the measured value is
more than 1 mm.
Sectional view
Subsequent work
Subsequent work
1. Install clutch.
