Boxster S (987) F6-3.2L (2005)
Connector
6. Unscrew fastening screws between multi-functional switch and transmission and pull off multi-functional switch from selector lever.
Fastening screws of multi-functional switch
Installing multi-functional switch
Installing multi-functional switch
Information: - When connecting the multi-functional switch to the selector lever, the multi-functional switch must not be tilted or pushed with force
onto the selector lever. Otherwise there is a risk of damaging the switch contact.
1. Connect multi-functional switch to the selector shaft. The flattened area of the switch splines -1- must be covered with the flattened side of the
selector shaft splines. -2-.
Connecting multi-functional switch
2. Connect multi-functional switch to transmission housing. To do this, turn the multi-functional switch until the dowel pin -3- on the transmission
housing is covered by the fitted bore -4- on the housing of the multi-functional switch.