Boxster S (987) F6-3.2L (2005)
Preparing windscreen for installation
Removing windscreen seal
INFORMATION: Only if the windscreen is re-installed
1. Pull off the seal -4-. Remove adhesive residues with cleaning solution -H1-.
Removing adhesive from the windscreen
INFORMATION:
-
Only if the windscreen is re-installed
-
The remaining adhesive helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean with cleaning solution.
1. Equip cutting device -C- with the flashing knife -D- and remove the remaining adhesive from the windscreen, ensuring that a surface coating of
adhesive remains.
Fitting windscreen seal
1. Stick seal -4- to the windscreen -5- from one edge along the entire border.