Boxster S (987) F6-3.4L (2008)
Preparing connection areas of the body for installing the front panel
1. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked area -A- using a hot-air gun or rotary brush. Grind
the connecting flanges until bare.
2. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked area -A- using a hot-air gun or rotary brush. Grind
the connecting flanges until bare.
3. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked area -A- using a hot-air gun or rotary brush. Grind
the connecting flanges until bare.
4. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked areas -A, B, C, D- using a hot-air gun or rotary
brush. Grind the connecting flanges until bare.
5. Coating spot-weld flange areas with zinc powder paint
5.1. Coat spot-weld flange areas with zinc powder paint.
Preparing front panel for installation
Safety instructions for sharp-edged body and unit parts