porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 4766 > < Convertible Top Deck Lid|Adjustments|Page 4763
Page 1
background image

Convertible Top Deck Lid: Procedures

Eliminating Noise Symptoms - Reworking Guide Rail For Hinge For Convertible-Top Compartment Lid

General information

Symptoms

Clicking noises when opening and closing the convertible top.

Causes and remedial action

Clicking noises can occur under load when opening and closing the convertible top as a result of play between the friction plate and guide rail.

In the event of a complaint, a base strap must be affixed to the guide rail at the left and right to remedy the situation on vehicles manufactured before the
date of introduction March 2005.

Tools and materials

999.911.227.40 Base strap

Preliminary work

Move convertible top to service position. Refer to Convertible-top service position.

Reworking guide rail for hinge for convertible-top compartment lid

1. Cut a strip of base strap measuring 140 mm x 15 mm.
2. Affix base strap -1- between the guide rail -2- and friction plate -3-.

Subsequent work

End service position. Refer to Convertible-top service position.

Procedures|Page 4766 > < Convertible Top Deck Lid|Adjustments|Page 4763