Boxster S (987) F6-3.4L (2008)
1. Lay the refrigerant line under the heat exchanger hoses and screw down on line to fluid tank -2- with fastening nut. - Tightening torque: 20 Nm (15
ft. lbs.)
2. Clip line into the holder.
3. Position holder for refrigerant lines and secure with the fastening nut -1-. - Tightening torque: 6 Nm (4.5 ft. lbs.)
Subsequent work
Subsequent work line condenser-fluid tank
Installing battery.
Filling in refrigerant.
Installing cowl panel cover.
Removing and Installing Condenser-Condenser Line
Removing And Installing Condenser-condenser Line
Technical values
Preliminary work
Preliminary work for line condenser-condenser
Removing front apron.
Draining refrigerant.
Removing the condenser-condenser line