Boxster S (987) F6-3.4L (2008)
2. Route wire harness for airbag -1- as shown behind the backrest side part support -2-.
Subsequent work
1. Install air cushion for backrest.
2. Install cover for left backrest.
3. Install cushion carrier for front backrest.
Removing and Installing Wiring Harness For Battery Wiring
Removing And Installing Wire Harness For Battery Wiring
Tools
Technical values
Preliminary work
Preliminary work for ground strap and B+ line of battery
1. Disconnect battery.
Preliminary work for B+ line from power distributor to engine connection point
1. Disconnect battery.
2. Remove current distributor.
3. Unscrew triggering unit.
INFORMATION: For vehicles with manual transmission.
4. Remove shift console.