Boxster S (987) F6-3.4L (2008)
be replaced.
Further fault finding must be performed by running "Guided Fault Finding" using the PIWIS Tester.
End of remedial action.
12. If the displayed voltage (mass air flow sensor 1 or 2) is greater than 1.1 volts (1.1000), this mass air flow sensor must be replaced.
End of remedial action.
Procedure:
Start "Guided Fault Finding" using the PIWIS Tester:
1. Switch on ignition.
2. Go to the PIWIS Tester Start menu and select -> Diagnosis.
3. Select vehicle type.
4. Press >> to start the control unit search.
5. Select -> "DME" in the "Control units" menu and confirm by pressing >> .
6. Select -> "Fault memory" in the "DME function selection" menu and confirm by pressing >> .
7. Press- Guided Fault Finding/F5 in the Fault memory menu and read and confirm the information that appears.
8. Select Guided Fault Finding in the selection menu and confirm by pressing -1- .
9. Select a fault code in the overview and confirm by pressing >> .
10. Work through the test plan instructions.
End of remedial action.