Boxster S (987) F6-3.4L (2008)
Exterior Lighting Module: Service and Repair
Removing And Installing Front Control Unit
Tools
Technical values
Preliminary work
Preliminary work - front control unit
Remove luggage compartment lining in the area around the front control unit.
Removing front control unit
If a new control unit has to be installed, read out as much of the data from the old control unit as possible using the PIWIS Tester 9718.
WARNING:
Risk of damage to electronic control modules.
-
If care is not taken, electrical and electronic components may be destroyed.
-
Before removing the control module, switch off the ignition and remove the ignition key.