Boxster S (987) F6-3.4L (2008)
CAUTION: Incorrect triggering of airbag modules.
-
Danger of injury and material damage if airbag sensors are not handled correctly.
-
Remove ignition key. Disconnect battery. Route or isolate ground strap so that all contact with a ground carrier (e.g. body, seat
frame) is avoided.
-
Always wait one minute after disconnecting the battery before disconnecting the connector from the sensor.
-
The airbag sensor must not be removed with the plug plugged in.
-
The airbag sensors cannot be interchanged. Install the sensor listed in the Spare Parts Catalogue (PET).
-
Always replace fastening nuts and bolts of sensors after customer service and reworking.
-
Never make alterations to the micro-encapsulated nuts and bolts which have a negative effect on the bond (e.g. using lubricant,
loosening bolts and screwing them down again).
Tools and materials
Tools
Removal tool, universal NR.21
Removing airbag sensor
Removing sensor for front airbag
1. Release electric connector -1- -A- and remove from sensor.