Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1457017.png)
4. Push on the receiver antenna connector for the auxiliary heater -arrow A-, until the connector -arrow B- is felt to engage.
5. Push on the receiver connector for the auxiliary heater -arrow C-, until the connector -arrow D- is felt to engage.
6. Screw down the receiver for the auxiliary heater using the fastening screws -1-.
NOTE: The number of plugs can vary, depending on the vehicle equipment.
7. Push the connectors of the antenna leads in the sockets of the same colour -arrows A- until the connectors -arrow B- are felt to engage.
