porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Antenna Cable|Testing and Inspection|Page 7457 > < Antenna Cable|Testing and Inspection|Page 7455
Page 26
background image

14. Position wire harness in rear spoiler and press onto Velcro strip segments -Arrows B-.
15. Connect the red connector to the red connection on the right antenna amplifier -Arrow A-.

16. Connect the antenna connector to the socket with the same colour of the right antenna amplifier -Arrow B-, until the connector is felt to engage.
17. Tighten ground strap with fastening screw -Arrow C-.
18. Fasten the lines with a new tie-wrap -1- and secure with new adhesive tape -Arrow D-.
19. Screw down the antenna lead for Kessy with the fastening screw to the right antenna amplifier -Arrow A-and press onto the Velcro strip

section-Arrow B-.

20. Press the plug connection together -Arrows A-, until the connector -Arrow B- is felt to engage.

Antenna Cable|Testing and Inspection|Page 7457 > < Antenna Cable|Testing and Inspection|Page 7455