Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1471001.png)
Tow Sensor: Service and Repair
Removing And Installing Tilt Sensor Control Unit
Preliminary work
1. Remove the side-panel lining at rear right.
Removing tilt sensor control unit
NOTE: The tilt sensor is integrated into the tilt control unit and cannot be separately replaced.
1. Switch off ignition and remove ignition key.
2. Undo the two fastening screws -arrows A- and remove tilt sensor.
3. Press detent on plug -arrow a- and pull off plug.
