porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Display and Operator Control Unit (PCM)|Page 7593 > < Removing and Installing Display and Operator Control Unit (PCM)|Page 7591
Page 3
background image

3. Unscrew the four fastening screws.

4. Carefully pull out the PCM2.

NOTE:  The number of plugs can vary, depending on the vehicle equipment.

5. Press lock on antenna plugs -arrows- and pull off antenna line -a, b and c-.

Removing and Installing Display and Operator Control Unit (PCM)|Page 7593 > < Removing and Installing Display and Operator Control Unit (PCM)|Page 7591