Cayenne (9PA) V6-3.2L (2006)
2. Position control unit on the PCB and secure with the two fastening screws.
NOTE: Observe the line routing, danger of pinching.
3. Fold up roof console, clip it in the roof liner and screw down using the four fastening screws. Close the glasses compartment and clip in the light
unit cover.
Teaching control unit for garage door opener
WARNING:
Danger of accidents if persons, animals or objects lie in the swinging range of the controlled mechanism during operation of the garage door
opener.
-
Ensure that there are no persons, animals or objects in the swinging range of the controlled mechanism during operation of the garage
door opener.
-
Observe the safety instructions for the original hand-held transmitter.
To operate the particular device (e.g. garage door, gate to property, alarm system):
-
press the appropriate key on the keypad -A-. The LED -B- lights up during signal transmission.