Cayenne (9PA) V6-3.2L (2006)
^
The entire threaded parts of the axle must be tightened in vehicle position. Vehicle position means: vehicle standing on the wheels, or the wheel
suspension is raised using a universal vehicle lift.
-Dimension X-, corresponds to vehicle position. Check dimension: 502 mm ± 10 mm
^
Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels). When raising the suspension, use a suitable
-intermediate layer (hard rubber)-. Do not damage the brake cover plate.
^
Bleed power-assisted steering.
^
Observe correct tightening torques.
^
Align vehicle.
^
Use the -Porsche System Tester- to calibrate the steering-angle sensor.
^
Perform a function test.
Install in reverse order.