Cayenne (9PA) V6-3.2L (2006)
2. Fit momentary-switch handle -8-, screw in fastening screws -7- and tighten to the specified tightening torque. -Tightening Torque: 2 ft lb.
3. Connect plug connection -6- until the locking tab engages audibly (-arrow A-).
4. Push wire harness -5- back into spare wheel mount (-arrow B-).
5. Fit grommet -4- on spare wheel mount.
6. Insert spacers -3a - 3c- at the positions shown and secure with adhesive tape to prevent them from falling out.
3a. Spacer: 3.1 mm
3b. Spacer: 4.3 mm
3c. Spacer: 5.1 mm