porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

ABOUT US
Removing and Installing Momentary-Switch Handle For Spare Wheel Mount|Page 9513 > < Removing and Installing Momentary-Switch Handle For Spare Wheel Mount|Page 9511

Cayenne (9PA) V6-3.2L (2006)

Page 4
background image

5. Clip wire harness -4- onto the cap -6-.

6. Push cover -3- onto lower bearing, guiding the wire harness -4- outward.
7. Screw in fastening screw -2- and tighten to the specified tightening torque. -Tightening Torque: 4 ft lb.

8. Connect plug connection -1- until the locking tab engages audibly -arrow A-.
9. Install rear apron. 

Removing and Installing Momentary-Switch Handle For Spare Wheel Mount|Page 9513 > < Removing and Installing Momentary-Switch Handle For Spare Wheel Mount|Page 9511