Cayenne (9PA) V6-3.2L (2006)
2. Position support for locking mechanism -6- on bumper.
3. Screw in fastening screws -5- and tighten to the specified tightening torque. -Tightening Torque: 8 ft lb. ± 0.5 ft lb.
4. Push on the connector -3, 4- until the locking tabs engage audibly -arrows A-.
5. Insert emergency release cable -1- into foam part -2- and clip it in.
6. Install rear apron.
Removing and installing holder
Removing holder
1. Open spare wheel mount.