Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1695002.png)
2. Unscrew fastening screw -2-.
3. Pull off cover -3- on lower bearing, guiding the wire harness-4- inward.
4. Push down safety clip -5- from the pneumatic spring -6- (-arrow A-).
5. Pull off the pneumatic spring -6- on the ball head.
6. Swivel bearing inward.
7. Push down safety clip -5- from the pneumatic spring -6- (-arrow A-).
8. Pull off the pneumatic spring -6- on the ball head and remove it.
Installing pneumatic spring
