Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-503004.png)
^
Different coolant additives must not be mixed and doing so may damage the cooling system. Only use original Porsche coolant additives.
^
The coolant must be set to antifreeze protection of -37°C. This corresponds to a mixing ratio of 50 : 50 (coolant additive : water). This mixing
ratio provides optimum corrosion and antifreeze protection.
^
Coolant additives, coolants and cleaning agents must be disposed of according to the respective, applicable national laws.
^
Seals in the cooling system must be replaced by new ones following disassembly.
1. Open maintenance cover.
2. Carefully open the cap on the coolant reservoir. Unscrew the cap in an anti-clockwise direction.
3. Open cap on the reservoir and remove.
4. Remove engine guard.
