Cayenne (9PA) V6-3.2L (2006)
Removing hydro-tappets
Note: Observe the most important working regulations and warning notes.
Note:
^
The roller-type cam followers are joined to the hydro-tappets (support elements) with a safety clip.
^
The safety clip must be handled carefully!
^
If the hydro-tappets are to be reused, they must be marked according to installation position with a water-resistant felt-tip pen and stored in such a
way that they cannot be mixed up!
^
If the hydro-tappets are to be reused, they must be reinstalled in the same position!
^
Roller-type cam followers must be set aside in such a way that they cannot be mixed up.
1. Take the roller-type cam followers with the support elements out of the cylinder head. The roller-type cam followers must be completely removed
carefully.