Cayenne (9PA) V6-3.2L (2006)
Note:
^
When unscrewing the oil pressure control valve, ensure that the screw plug is under spring pressure.
^
Do not let the valve body fall.
^
Note the installation location of the valve body.
^
More oil can leak out from the opening.
2. Unscrew screw plug of oil pressure control valve (a/f 19) -arrow-.
3. Remove the four components of the oil pressure control valve. Always replace sealing ring.
Assembling oil pressure control valve
Note:
^
Ensure that the installation opening of the oil pump housing is clean!
^
Note the installation location of the valve body.
^
Always replace sealing ring.
1. Guide in the valve body with the bores into the oil pump housing first.
Note: Screw in the screw plug by hand against the spring pressure.
2. Prevent the valve body from falling and screw in the spring, new sealing ring and screw plug.