porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removal and Replacement|Page 2138 > < Removal and Replacement
Page 2
background image

7. Remove the vacuum line on the throttle body from the connector tube. Then take the intake manifold out of the engine compartment.

8. Remove cover of air cleaner housing by loosening the clamps -arrows- and pulling off the cover.

9. Separate the six ignition coils from the wiring loom. To do this, press the connectors slightly downwards -arrow A-, release them using a suitable

auxiliary tool (e.g. an angled wire) -arrow B- and remove them -arrow C-.

Removal and Replacement|Page 2138 > < Removal and Replacement