Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-458002.png)
Leak test
WARNING:
Danger of injury from flying components.
-
Do not pull out the oil dipstick or open the engine during the test procedure.
NOTE:
-
The specified description can be used to check the intake system from the air cleaner outlet to the injection valves for leaks.
-
Any leaks that exist between the air cleaner cover and the intake distributor seal can be located using this method.
-
Proceed systematically with the check.
NOTE:
The illustrations are from the V8, however, the locks and the procedure are identical.
Cylinders must not be located in the overlapping TDC. This happens only if the crankshaft was turned manually.
1. Connect the plug 9264/7 (with compressed-air connection) to the air cleaner connection and push in the safety bracket. Then connect a
compressed-air hose to the connection on the plug.
