Cayenne (9PA) V6-3.2L (2006)
ATTENTION Studs that are too long can cause irreparable damage to the cylinder head thread!
^
Only use studs that are the same length as the original studs.
Note:
^
Before inserting the new stud, the interior thread of the cylinder head must be checked for damage!
^
Measure the length of the original studs. Make sure the new studs are the same.
5. Screw in new stud hand-tight, then screw two nuts onto the new stud as before and counter.
6. Screw new stud in by turning the front nut to the right.