porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Servo Motors|Page 6791 > < Removing and Installing Servo Motors|Page 6789
Page 3
background image

6. Insert the retainer plate from below into the guides.

7. Connect the electrical plug, pressing on until it audibly clicks into place -2-.

8. Tighten the two fastening screws. Tightening torque: 1.0 ftlb.
9. Clip in right cover and screw down with the fastening screw. Tightening torque: 1.0 ftlb.

Subsequent work

Install glove compartment.

Removing and Installing Servo Motors|Page 6791 > < Removing and Installing Servo Motors|Page 6789