Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1334004.png)
NOTE:
-
Switch on ignition and carry out the service position menu, Drive links menu with the Porsche System Tester in the Climatronic.
-
As an alternative, the servo motors can also be powered with 12 volts until they have reached the correct position. Always use the circuit
diagram for this.
4. Connect the electrical plug connections to the servo motors.
5. Switch off ignition and remove ignition key.
6. Press in plug again and pull apart plug connection.
NOTE: Make sure that the drivers of the servo motors are pushed into the mountings.
7. Insert retainer plate with the three servo motors from below into the guides on the air conditioning unit as far as it will go.
8. Push on electric plug connection -Arrows 2- until connectors are felt to engage.
9. Screw in both fastening screws -1-. Tightening torque: 1.0 ftlb.If necessary, screw down the guide screws -3- of the retainer plate. Tightening
torque: 1.0 ftlb.
10. Clip left cover into place and secure with the fastening screws. Tightening torque: 1.0 ftlb.
