porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Servo Motors|Page 6804 > < Removing and Installing Servo Motors|Page 6802
Page 6
background image

18. Screw in both fastening screws -Arrows 1-. Tightening torque: 1.0 ftlb.

Subsequent work

1. Install relay carrier. Install relay carrier holder.
2. Install vehicle electrical system control unit.
3. Install KESSY/immobiliser control unit.
4. Install trim under left dashboard.

Removing and Installing Servo Motors|Page 6804 > < Removing and Installing Servo Motors|Page 6802