porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Air Duct > < Removing and Installing Servo Motors|Page 6809
Page 7
background image

10. Screw in both fastening screws -1-. Tightening torque: 1.5 (1.0 ftlb.) Nm
11. Route electric lines at air-conditioning unit housing. When doing so, make sure the lines are not pinched or damaged by the servo motors.

Subsequent work

Subsequent work for servo motor for four-zone air conditioning

1. Install glove compartment.
2. Install trim panel under dashboard at the right.

Air Duct > < Removing and Installing Servo Motors|Page 6809