Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1344004.png)
5. Fasten antenna with adhesive strips -a-.
6. Press styrofoam element into the opening -Arrow C- until it is felt to engage.
7. Route the antenna along the wiring harness for the rear window and pull it through the rubber sleeve on the rear spoiler -Arrow A-.
8. Fasten the antenna to the rubber sleeve with adhesive tape -Arrow B-.
9. Insert rubber sleeve into rear spoiler -Arrow C- and fasten the antenna with adhesive tape -Arrow D-.
10. Lay wiring harness in wiring duct and push on cover -Arrow A- until locking tabs -Arrows B- are felt to engage.