Cayenne (9PA) V6-3.2L (2006)
6. Close holder -Arrow B- until locking tabs are felt to engage -C-.
7. Install the cover and screw down using fastening screws -Arrow 1- and fastening nuts -Arrows 2-. Tightening torque: 1.5 ftlb. Tightening torque:
3.5 ftlb.
Installing fuel line - fuel pump to tank
NOTE: The direction of travel is shown by an arrow with the designation "x".
1. Push the line through forwards -Arrow A-, connect to the fuel pump -Arrow B- and fasten with a new hose clamp-C-.
2. Press line into holder and close the holder -Arrow D- until the locking tab can be felt to engage.
3. Push the line through up along the tank -Arrow E- and press into holder -Arrow F- until it can be felt to engage.
4. Push line onto tank connection-Arrow A- until retaining clip -Arrow B- is felt to engage.