porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Blower Motor Resistor|Service and Repair|Page 6934 > < Removing and Installing Heater/Fresh-Air Blower Motor|Page 6930
Page 1
background image

Blower Motor Resistor: Service and Repair

Removing And Installing Blower Regulator

Preliminary work

Remove glove compartment.

Removing blower regulator

ATTENTION:

Danger of damage and injury.

-

Remove ignition key.

-

First pull off the plug contacts on the switch before the fan control is removed.

NOTE:  The fan control is located in the air-conditioning unit beside the fan.

1. Press the latch of both connectors -Arrows a- and remove the connectors from fan control.

Blower Motor Resistor|Service and Repair|Page 6934 > < Removing and Installing Heater/Fresh-Air Blower Motor|Page 6930