Cayenne (9PA) V6-3.2L (2006)
6. Turn suction hose away to the right -arrow C-.
7. Release the breather hose -arrows D- and pull off -arrow E-.
8. Remove air filter cover with suction hose.
NOTE:
-
Mark the rolling direction on the top before removing the drive belt.
-
Only screw the pressure screw in far enough to remove the drive belt. Otherwise, the tensioning roller housing may be damaged.
9. Mark the rolling direction -b- on the drive belt.
10. Slacken the tensioning roller with the pressure screw (M8 x 50) -arrow c--arrow A- and remove the tensioning belt -arrow B-.
11. Unscrew fastening screw -arrow 1-.
12. Turn the pulley -arrow A-, then unscrew the fastening screws -arrows 2- and remove through the openings in the pulley.
13. Take out power-steering pump and remove from the work area -arrow B-.
14. Unscrew the fastening screws -arrows 3- and take out both refrigerant lines -arrow-.