Cayenne (9PA) V6-3.2L (2006)
Removing suction line in vehicle
ATTENTION:
Danger of injury from contact with the refrigerant.
-
Observe safety regulations when working with refrigerant.
1. Remove refrigerant by suction.
2. Raise the auxiliary air-conditioning unit and unscrew both fastening screws -1-.
3. Remove the suction line -Arrows- and close with plugs.
Installing suction line in vehicle
1. Remove the plugs on the suction line, check the O-rings and replace if in doubt.
2. Raise the auxiliary air-conditioning unit and push the suction line onto the connections -arrows- and screw down with both fastening screws -1-.
Tightening torque: 12 (9.0 ftlb.)Nm.
3. Ensure that the water drain is connected to the drain when fitting the auxiliary air-conditioning unit.