porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Display and Operator Control Unit (PCM)|Page 9651 > < Removing and Installing Display and Operator Control Unit (PCM)
Page 2
background image

3. Unscrew the four fastening screws. -A-

4. Carefully pull out the PCM. -B-

NOTE:  The number of plugs can vary, depending on the vehicle equipment.

5. Press lock of antenna plugs -arrows- and pull off antenna line -a, b and c-.

Removing and Installing Display and Operator Control Unit (PCM)|Page 9651 > < Removing and Installing Display and Operator Control Unit (PCM)