porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Fuse Element In Power Distributor|Page 5744 > < Removing and Installing Fuse Element In Power Distributor
Page 2
background image

3. Fold the carpet sections forward and remove the two fastening screws -arrows 1-.
4. Fold the seat back completely -arrow B-. With the seat in its folded position, move the seat forward again using the fore-and-aft adjustment -arrow

C-.

5. Fold up carpeting and unscrew fastening nuts -arrow 2- from battery ground strap on the body.

6. Route or isolate ground strap so that all contact with a ground carrier (e.g. body, seat frame) is avoided.

NOTE:  Only for vehicles with auxiliary battery.

7. Release cover -arrows A- and fold it up -arrow B-.

Removing and Installing Fuse Element In Power Distributor|Page 5744 > < Removing and Installing Fuse Element In Power Distributor