Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1148005.png)
6. Pull out wire harness -1- under the hydraulic unit. Remove armouring and disconnect ground strap from bonnet wire harness.
7. Open the three retaining clips -arrow B- and take out wire harness.
8. Expose wire harness from Porsche Stability Management control unit connector up to foam grommet -1- in the firewall. To do this, remove the
corrugating hoses and the armouring.
9. Release the cap on the Porsche Stability Management control unit connector 4x -arrows a- and take off.
