porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 5907 > < Procedures|Page 5905
Page 27
background image

34. Open clips -Arrows C- and remove line -Arrows D-.
35. Unscrew fastening nut -1- (next to relay carrier in plenum panel E-Box) and remove ground straps together with twist lock -Arrow A-.

36. Press out rubber sleeve (firewall) -Arrow B- and remove line inwards.

Remove main wire harness - dashboard area and centre console.

Removing main wiring harness - engine compartment in centre

Remove wiper motor.
Remove left and rear engine compartment covers.
Remove plenum panel at front left.

1. Unscrew fastening nut -1- (firewall centre) and remove ground strap together with twist lock -a--Arrow A-.

Procedures|Page 5907 > < Procedures|Page 5905