Cayenne (9PA) V6-3.2L (2006)
13. Cut tie-wrap -C-.
14. Remove line -a- and (only in cars with additional heating) -b- on corrugated hose holders (transmission tunnel) from threaded bolts -Arrows A-.
15. Press out the rubber sleeve to the inside -Arrow B-.
Only for vehicles with level adjustment.
16. Remove right centre cover.
17. Release the two connectors (underbody right) -Arrows A- and remove them -Arrows B-.
18. Unclip line -Arrow C- and press rubber sleeve up and out -Arrow D-.
19. Lower the vehicle.
20. Press down lock on connector (head airbag) -Arrow A- and maintain in this position.