Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1149066.png)
33. Loosen styrofoam elements -Arrows C- and remove line -Arrow D-.
34. Press down protective cover on connector (C-pillar) -Arrow A- and maintain in this position.
35. Release connector -Arrow B- and pull off -Arrow C-.
36. Cut tie-wrap -D-.
37. Remove airbag sensor on C-pillar.
38. Unscrew fastening nut -1- (rear wheel housing) and remove ground straps together with twist lock -a--Arrow A-.
39. Remove wiring duct from threaded bolt and wheel housing seam -Arrows B-.
40. Release connector -Arrow A-(rear seat support) and remove from clip -Arrow B-.
