Cayenne (9PA) V6-3.2L (2006)
14. Push on wire sleeve -Arrow C- until locking tabs -D- are felt to engage.
Only for vehicles with electric adjustment fitting.
15. Press down protective cover on connector (B-pillar) -Arrow A- and maintain in this position.
16. Insert connector -Arrow B- until locking tab -C- is felt to engage.
17. Fit ground straps together with twist lock on threaded bolt -Arrow D- and screw down with fastening nut -1-. Tightening torque: 6.5 ftlb.
18. Clip line to B-pillar -arrows-.
Only for vehicles with level adjustment.
19. Push line for compressor (B-pillar floor area) down and through -arrow- and fasten rubber sleeve in floorpan.