porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 5961 > < Procedures|Page 5959
Page 81
background image

63. Tighten the five fastening screws on the carbon canister and the two on the degassing tank in the right wheel housing to the specified torque

-arrows-.

Only for vehicles with tyre pressure monitoring system.

64. Push connector onto antenna for tyre pressure monitoring system (rear wheel housing) -Arrow A- until locking tab -B- is felt to engage.
65. Lower the vehicle.

Lay floor carpeting in passenger compartment.
Install front right side-section trim panel.
Install right B-pillar trim panel.
Install tilt sensor control unit.
Install loudspeaker amplifier.
Install CD changer.
Install control unit for trailer hitch.
Install TV tuner.
Install side trim panel for rear luggage compartment.
Install right rear light.
Install rear right wheel housing liner.
Install Kessy antenna on rear impact member.
Connect the battery.

Removing and Installing Main Wiring Harness - I

Removing And Installing Main Wiring Harness

Procedures|Page 5961 > < Procedures|Page 5959