Cayenne (9PA) V6-3.2L (2006)
8. Release the connector on the loudspeaker -arrows C- and pull it off -arrow D-.
9. Unclip the wiring harness using a removal tool, universal NR.21-a- (-arrows-).
10. Press out the rubber sleeve to the inside -arrow A-.
11. Remove the wiring harness at the outside -arrow B-.
Installing wiring harness for door
Installing wiring harness for door - door sub-frame
1. Push the wiring harness and rubber sleeve through the opening from the outside to the inside -arrow A-.
NOTE: After installation, the rubber sleeve must run up to the A-pillar.
2. Insert the rubber sleeve into the door sub-frame from the inside -B- until it is felt to engage -arrows-.